ACSI2TNFS Current project

Big progress since the last update! ACSI2TNFS — a Raspberry Pi Pico 2 W that turns the ACSI (DMA) hard-disk port on an Atari ST, STE, Mega ST/STE or TT into a network-connected hard disk — is now out in the open and running on real hardware across the whole family.

Where SideTNFS lives on the cartridge port, ACSI2TNFS sits on the ACSI bus and shows up to the Atari as a plain old hard disk, no extra software needed to boot from it. TNFS network drives, a network clock, and — brand new — internet access via STinG all come along for the ride. Source code is public on GitHub.

  • Drive C: — a small, bootable hard disk tucked away in the Pico's own flash
  • Up to three TNFS network drives, read and write, drive letters D: through P:
  • A network clock that sets itself at boot — NETCLOCK.PRG even covers you when the adapter's own driver can't load (HDDRIVER, looking at you)
  • New: real internet on the Atari through the STinG TCP/IP stack — ping, FTP, browse the web — via ACSI_NET.STX and a simple STINGINS.TOS installer
  • ACSITNFS.PRG, the same friendly config tool from SideTNFS, rebuilt for ACSI: Wi-Fi, drives, clock and ACSI ID, all set from the Atari itself
  • A configurable ACSI device ID, so it plays nicely alongside another hard disk or ACSI device such as an UltraSatan or ACSI2SD
  • A USB console for diagnostics, plus a passive ACSI bus sniffer mode for the curious

Status

Up and running on real hardware across the board: Atari ST (TOS 1.02/1.04), EmuTOS, Mega STE (TOS 2.06, with HDDRIVER) and TT (TOS 3.06, with AHDI). The STinG internet side is shiny and new, and still getting polished.

A batch of version 2 PCBs is in the works, with testing coming up soon — and the firmware is still getting an optimization pass. The first proper release will follow once both are done!

Source code and issue tracker: github.com/RetroLoft/ACSI2TNFS